The most important element in glass bottle production is the glass bottle mold. I believe that all glass bottle manufacturers and almost all sales staff are familiar with molds, and they all know that molds are made with a lathe, but if you ask about molds, it is estimated that few people really understand the process. . The basic steps for making glass bottle molds are listed below, everyone can share
The first step is to plan the drawing: hand over the sample glass bottle or size to the planner to plan the drawing of the entire machine group;
The second step is to find the blanks: turn out the blanks of each component according to the drawings;
The third step is to mill with a milling machine: mill the initial mold and blank into the plane through the milling machine
The fourth step is to integrate everything into parts at the same time: all workshops, all horses and all lathes have been started, and their respective labor divisions; there are dry primary molds, the end of the mold is the bottom of the mold, the road is completed, and then the first Two completed
At the end of the mold bottle, there is a dry head, a dry funnel, a dry tap and a dry die, and then someone will dry the core or punch and the cooler;
The fifth step of carving: After the second step of molding is completed, put the shape or original model into the carving lathe, and automatically hand over 99 jobs to the carving according to the planned procedure, thus saving time and energy.
Make a mistake
The sixth step is polishing: use fine sandpaper to polish the finely carved mold and the final mold;
The seventh step is assembling: the components assembled on each production line are assembled together, and then the loose parts are assembled into finished parts;
The eighth step is drilling: drilling or venting all the finished parts/determining according to the drawings.